Garage doors are a convenient way to enter and exit your home, but they can be a source of frustration when they don’t work properly. If your garage door won’t close with the remote but will open, there are a few things you can do to troubleshoot the problem.
There are a few reasons why your garage door might not close with the remote but will open. One possibility is that the remote itself is not working properly. Another possibility is that there is a problem with the garage door opener.
If your garage door won’t close with the remote but will open, here are a few things you can do to troubleshoot the problem:
Check the remote.
Make sure that the batteries in the remote are fresh. Batteries typically last for about one year. You can check the batteries by looking for the date code on the back of the remote. If the batteries are more than one year old, they should be replaced.
You can also try programming the remote to the garage door opener again. This will erase any previous programming and start fresh. To program the remote, follow the instructions in the owner’s manual.
Check the garage door opener.
Make sure that the garage door opener is plugged in and that the power is on. You can check the power by looking at the light on the garage door opener. If the light is not on, the garage door opener is not receiving power.
You can also try resetting the garage door opener. This will erase any previous settings and start fresh. To reset the garage door opener, follow the instructions in the owner’s manual.
Check the safety sensors.
The safety sensors are designed to prevent the garage door from closing on anything or anyone. If the safety sensors are not working properly, the garage door opener may not close.
To check the safety sensors, shine a flashlight at them. The sensors should be aligned so that the beams are crossing each other. If the beams are not aligned, they may need to be adjusted.
You can adjust the safety sensors by turning the screws on the sensors. Turn the screws clockwise to move the sensors closer together, and counterclockwise to move them farther apart.
Check the limit switches.
The limit switches tell the garage door opener how far to open and close the door. If the limit switches are not set properly, the garage door may not close completely.
To check the limit switches, use a screwdriver to adjust them. Turn the screws clockwise to move the limit switches closer to the door, and counterclockwise to move them farther away.
Check the springs.
The springs are what lift and lower the garage door. If the springs are damaged, they may not be able to lift the door high enough to close it completely.
To check the springs, look for any signs of damage, such as rust, cracks, or broken wires. If you see any signs of damage, the springs should be replaced.
- Keep the remote clean and dry. Moisture can damage the remote and cause it to malfunction.
- To clean the remote, wipe it down with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Store the remote in a dry place when not in use.
- Avoid using the remote in extreme temperatures. Extreme temperatures can also damage the remote.
- Do not leave the remote in direct sunlight or in a hot car.
- Do not use the remote in freezing temperatures.
- Have your garage door opener regularly inspected and maintained by a qualified technician. This will help to prevent problems and keep your garage door working properly.
- A qualified technician can inspect the garage door opener for any damage or wear and tear. They can also make adjustments to ensure that the garage door opener is working properly.
In most cases, you can troubleshoot a garage door that won’t close with the remote by following the steps above. If you have tried all of these steps and the door is still not closing, you may need to contact a professional for help.
Call to Action
If you are concerned about your garage door not closing with the remote, you can take steps to prevent the problem from happening. By following the tips above, you can help ensure that your garage door will continue to work properly.